SDL Atlas Vortex M6 - Troubleshooting: Errors and Faults; Open Lid and Temperature Errors

__________________ Vortex M6
33
7.0ErrorsandFaults

7.1 OpenLid:Iftheinstrumentisnotrunning,firstcheckthelidtoensurethatit
isproperlyclosed.Anerrorwillbelistedonthecontrolscreen




7.2 WaterTempError.Thiswillappeariftheactualwatertemperature in the
washer is outside of the specifications in the AATCC Monograph and if the
WaterTemperatureAlarmsareturned“ON”(Sect5.2.1).Itcanbebypassed
bypressing“Enter”.

