SDL Atlas Vortex M6 - Page 28

__________________ Vortex M6
21

4.2.2 Thecycleprogrammingscreenwillappearandthe“ProgramName(exP1)”,
“Wash Water Level”, “Wash Time”, “Wash Temp”, “Soak Time”, “Agitate
Speed”, “Rinse Water Level”, “Rinse Time”. “Rinse Temp”, “Number of
Rinses”,“SpinSpeed”,and“SpinTime”canbeprogrammedbytheoperator.
Clicktherespectiveboxforthesetting,inputthevalue,andpresstheenter
button(seebelowforexampleon“WaterLevel”).
Note: Pressing the emptybuttonjust to the right of “Customize”will allow
theusertonametheprogram.Pressthe
button to return to the
previousscreen.


