SDL Atlas Vortex M6 - Page 32

__________________ Vortex M6
25
thecycle.Thiswill default to“N”afteronefullrunof
theinstrument
PowerResume: This will allow the user to determine if they want the
instrumenttoautomaticallyrestartordrainforanew
cycleshoulditlosepower
TestWithoutAlarms:ThereareanumberofalarmsintheVortexoperation
based on recommendations within the AATCC Test
Methods.Thesecanbetoggledonandoff.
5.2.2 CommonSettings:PressingtheCommonSettingsbuttonwilltaketheuserto
thisscreen: