1/10
Contents
1. Preface
2. General description
3. Preparation before starting
4. Using the generator set
5. Safety features (if fitted, see specifications
table)
6. Maintenance schedule
7. Maintenance procedures
8. Storing the generating set
9. Fault finding
10. Specifications
11. Cable sizes
12. Conditions of warranty
13. EC Declaration of conformity
1. Preface
1.1. Recommendations
Thank you for buying one of our generating sets. We recommend that you read this manual carefully and follow the safety and
maintenance advice and user instructions for your generating set very closely.
The information contained in this manual is taken from technical data available at the time of print. In the intention of permanently
improving the quality of our products, this information may be amended without warning.
1.2. Pictograms and plates on the generating sets and what they mean
Danger
Warning: risk of electric
shock
Earth
Danger, risk of burns
Warning: oil is not supplied with the generating set. Always check the oil level before starting the generating set.
1 2 3
1 - Important, refer to the documentation accompanying the generating set
2 - Warning, emission of toxic exhaust gases. Do not use in a confined or poorly ventilated area.
3 - Stop the motor before filling with fuel
A = Generating set model
B = Generating set output
C = Voltage
D = Amperage
E = Current frequency
F = Power factor
Example of an identification plate
G = Fuse rating
H = Generating set noise output
I = Generating set earth
J = Reference Standard
K = Serial number
To Next Page