EasyManuals Logo

SDMO TECHNIC 15000 TE C User Manual

SDMO TECHNIC 15000 TE C
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Contents
1. Preface
2. Description
3. Preparation before use
4. Using the generator set
5. Safety features
6. Maintenance schedule
7. Maintenance procedures
8. Storing the generating set
9. Troubleshooting
10. Specifications
11. Cable sizes
12. EC Declaration of conformity
13. Serial numbers
1. Preface
1.1. Recommendations
Read this manual carefully before use.
The safety advice and the usage and maintenance instructions for the generating set must always
be strictly adhered to.
Warning
The information contained in this manual is taken from technical data available at the time of print. In line with our policy of continually
improving the quality of our products, this information may be amended without warning.
1.2. Pictograms and plates on the generating sets and what they mean
Danger
Danger:
risk of electric
shock
Earth
Danger:
risk of burns
Important: oil is not supplied with the generating set.
Before starting the generating set,
always check the oil level.
1 - Important: refer to the documentation accompanying the generating set.
2 - Warning: emission of toxic exhaust gases. Do not use in a confined or badly ventilated
area.
3 - Stop the engine before filling with fuel.
1 2 3
Example of an identification plate
(A): Model (H): Current amperage
(B): CE/GOST marking
(when applicable)
(I): Current frequency
(C): Guaranteed acoustic
power level
(J): Current voltage
(D): Maximum power (K): Protection rating
(E): Nominal power (L): Reference standard
(F): Power factor (M): Model number
(G): Weight
1.3. Instructions and safety regulations
Do not run the generating set without having put back the protective covers and closed the access
doors.
Never take the protective covers off or open the access doors if the generating set is running.
Dange
r
1.3.1 Warnings
You are likely to encounter several warning symbols in this manual.
This symbol indicates a definite risk to a person's health and life. Failure to follow the corresponding
instruction poses serious risks to the health and life of those concerned.
Dange
r
This symbol draws attention to the potential risk to a person's health and life. Failure to follow the corresponding
instruction may pose serious risks to the health and life of those concerned.
Warning
This symbol indicates a dangerous situation if the warning is not heeded.
Failure to follow this instruction could result in less serious injury or damage.
Important

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SDMO TECHNIC 15000 TE C and is the answer not in the manual?

SDMO TECHNIC 15000 TE C Specifications

General IconGeneral
BrandSDMO
ModelTECHNIC 15000 TE C
CategoryInverter
LanguageEnglish

Related product manuals