MAN.200.EN--05--SDT200-user-manual-Eng.docx
SDT200 technical specifications
Technical specifications for all SDT200 versions
For SDT200 ATEX version specific technical specifications, please see next page
Graphic LCD with backlighting (128 x 64)
Ultrasonic sensor
Pyrometer (according to the version)
Through specific connector (Lemo 7 pin connector)
- 20 Measurement Nodes (measurement points)
- Total 4000 Measurements (measurements data)
Software for transferring data to PC
Rechargeable battery type: 8 cell, 4.8 V, NiMH (Nickel Metal Hydride)
Nominal capacity: 4.4 Ah
Life span: 500 to 1,000 charge/discharge cycles
Autonomy: 6 to 7 hours
Protections: short-circuit, reverse polarity and temperature protected
Auto power down after preset time
-15 °C to +60 °C / 14 °F to 140 °F non condensing
226 x 90 x 40 mm / 8.90 x 3.54 x 1.57 inches (L x W x H)
noise isolating, NRR 25 dB (tested in an accredited NVLAP
laboratory)
(*) for optimum performance, this battery pack is equipped with an electronic management system (includes digital
serial number, capacity and temperature management).
To Next Page
Loading...