SE Electronics Gemini II - Technical Specifications

4
Technical Specifications
Capsule
Handcrafted 1.4" true condenser capsule
Polar pattern
Cardioid
Frequency range
20 – 20,000 Hz
Sensitivity
40 mV/Pa (-28 dBV)
Attenuation pad
10 dB, switchable
Max. SPL (0.5% THD)
135 / 145 dB
SPL
(0/10 dB Attenuation pad)
Equivalent noise level
13 dB(A)
Dynamic range
122 / 132 dB (0/10 dB Attenuation pad)
Signal-to-noise ratio
81 dB
Low cut filter
150 Hz, 6 dB/Oct, switchable
Electrical Impedance
200 Ohms
Recommended load impedance
>1k Ohms
Connectivity
3-pin male XLR connector
Dimensions
Microphone
Diameter 80 mm (3.15 in.) Length 220 mm (8.66 in.)
Remote Control Unit
186 x 157 x 81 mm (7.32 x 6.18 x 3.19 in.)
Weight
Microphone
1180 g (41.6 oz.)
Remote Control Unit
1970 g (69.5 oz.)
Frequency response Polar Pattern
Support
In the event that you experience any problems or have any questions regarding your sE product, please
contact your dealer first for the fastest and most direct service. If authorized service is required, it will be
arranged by that dealer: http://www.seelectronics.com/dealers
If you are still having difficulties with support or assistance, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us
Lastly, please remember to register your new gear with sE to extend your warranty to a full three years:
http://www.seelectronics.com/registration