Sea-doo 230 Series User Manual

OPERATING MODES
ni
MA
h/lagMPR
pal
lmo2010-003-086
RAMP
3.UsingtheUPandDOWNswitch,
select the appropriate RAMP.
4. Press SET button to accept the se-
lection.
5. Now determine the target speed us-
ing UP and DOWN switch.
ni
MA
h/lagMPR
pal
lmo2010-003-087
TARGET SPEED
6. Press SET button to confirm the
speed. The indication SKI MODE
will be displayed with the deter-
mined speed.
ni
MA
h/lagMPR
pal
lmo2010-003-088
SKI MODE
7. Press the SET button again to acti-
vate the launch sequence. At this
time, the SKI MODE light blinks.
NOTE: In the launch sequence mode,
the first 95% of throttle/shifter lever
travel is used to position the boat and
stretch the cord without engaging the
SKI MODE.
8. When everybody is ready (operator,
watcher and skier or wakeboarder),
push the throttle/shifter lever in full
throttle position. The SKI MODE
will be activated and the light turns
ON.
230 Wake
1. Touch SKI icon.
lmo2012-005-029_a
1. Ski icon
2. Touch SELECT for ramp selection
menu.
3. Touch desired preset RAMPS 1 to 5.
lmo2012-005-028_a
PRESET RAMP DISPLAY
4. Enter target speed using UP/DOWN
arrows.
5. Touch SET to confirm Ramp and tar-
get Speed selection.
104
______________

Sea-doo 230 Series Specifications

General

Brand	Sea-doo
Model	230 Series
Category	Boat
Language	English