Sea Eagle Boats PackFish7 - Foot Pump Setup and Valve Operation; Foot Pump Setup; Seat Valve Adapters; Air Compressor Warning

5
Boat valve adapter is
hook-in style which is
called Recessed Valve
Adapter.
The A42 foot pump comes
with a hose and several
adapters. A hook-in style
adapter is needed for
valves on the boat. The
push-in or the screw-in
adapter is used for seat
valves.
To open pump, release
pump clip by squeezing
the top and bottom halves
together. Unwind hose.
PackFish7™ | Foot Pump Set Up
Look for the ination port
which is marked “INFLATE”
with an arrow. Screw hose
into port tightly.
Note: Use the “DEFLATE”
port when you need to
pack your boat down as
compact as possible.
To inate boat, insert
recessed valve adapter into
hose. Push adapter in hose
and twist to lock
.
To inate seat, insert either
the wide end or screw-on
adapter into the hose. Push
adapter in hose and twist
to lock.
PF7 is a low pressure boat, electric pumps are
not recommended. High pressure pumps will
not automatically shut o, and low pressure
pumps are not compatible with the valve type.
Warning: Air compressors that are designed for
other uses, like tire ination (usually around 32
PSI) can easily harm your Sea Eagle which works
at a much lower pressure. For this reason we
recommend only using Sea Eagle pumps.