Sea Eagle Boats PackFish7 - Boat Assembly and Inflation; Valve Operation and Components; Air Chamber Identification

6
Press and turn stem
counterclockwise so it can
pop UP. When the stem is
up, valve is closed and will
hold air. To let air escape
for deflation, press and turn
stem clockwise until locked
open.
Inflate safety chamber first
(front valve). With recessed
valve adapter in hose, push
and turn into valve
opening. Pump air until
chamber is full but not firm.
Twist hose counterclock-
wise and pull out. No air
should escape. Replace cap
in opening.
Valve has three parts,
a cap, valve body with
stem and a base which
is inside the air
chamber. Twist the valve
cap counterclockwise
and pull it out of
opening.
PackFish7™ | Assembly & Inflation
Select a at, hazard free area to unfold the boat.
PF7 kit: boat, backpack bag, pump, oars and inatable
seat with black valves and a repair kit.
PF7 has two air cham-
bers. Outside valve is for
the safety chamber, it is
a ring shaped chamber
above the main cham-
ber. The inside valve in-
flates the main chamber.
Inflate main chamber.
Pump until chamber is
firm and boat is rigid.
Insert floorboard after
inflating safety chamber.
Angled corners of board
go nearest rod holder
bases. Holes in board are
not used with PF7.