EasyManua.ls Logo

SeaDoo 2002 GTX 4-TEC - Break-in Period and Inspection; Break-in Period Requirements; 10-Hour Inspection Recommendation

SeaDoo 2002 GTX 4-TEC
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
BREAK-IN PERIOD
CAUTION: Scrupulously follow the
instructions of this section. Failure
to do so may reduce the engines life
and/or performance.
With SEA-DOO watercraft powered
by Rotax
®
engines, a break-in period of
10 hours is required before continuous
operation at full throttle.
To achieve a good break-in, throttle le-
ver should not be depressed more than
3/4, however, brief acceleration and
speed variations contribute to a good
break-in.
CAUTION: Continued wide open
throttle runs and prolonged cruising
without speed variations should be
avoided, this can cause engine dam-
age during the break-in period.
NOTE: Never add oil in fuel tank dur-
ing break-in period.
10-Hour Inspection
It is highly recommended that after the
first 10 hours of operation, the water-
craft be checked by an authorized Sea-
Doo dealer. This inspection will also
provide the opportunity to discuss the
unanswered questions you may have
encountered during the first hours of
operation.
The 10-hour inspection is at the expense
of the watercraft owner.
smo2002-003_a.book Page 46 Friday, October 12, 2001 2:04 PM

Table of Contents

Related product manuals