SeaDoo 2002 GTX 4-TEC - Maintenance - Specific Checks; Throttle Cable and Oil Change Procedures; Fuel System and Steering Alignment

67
Periodic Inspection Chart
DESCRIPTION
FREQUENCY
FIRST 10 HOURS EVERY 25 HOURS OR 3 MONTHS EVERY 50 HOURS OR 6 MONTHS EVERY 100 HOURS OR 1 YEAR TO BE PERFORMED BY
GENERAL
Lubrication/corrosion protection ✔ O
ENGINE
Engine oil and filter replacement ✔✔D
Support and rubber mount condition/
tightness
✔✔D
Condition of seals and fasteners ✔✔D
Exhaust system fasteners ➄✔ ✔D
Spark plug replacement ➄✔D
COOLING
SYSTEM
Flushing (exhaust system) ✔➂ O
Hose condition and fasteners ✔✔D
Coolant replacement ➃ D
Coolant expansion tank cap/cooling system
pressure test
➃ D
FUEL
SYSTEM
Throttle cable, inspection/lubrication ✔ O
Fuel injection system sensors, visual
inspection ➄
✔✔D
Throttle body cleaning and inspection. Fault
code reading ➄➀
✔ D
Fuel vent line pressure relief valve inspection ✔ D
Fuel lines, connections and fuel system
pressurization ➄
✔✔D
Visual inspection: throttle body, sensors, fuel
lines, fuel rail and fittings ➄
✔✔D
Air intake silencer fit/tightness ✔✔D
Fuel tank straps visual inspection ✔✔O
ELECTRICAL
SYSTEM
Electrical connections condition and
fastening (ignition system, starting system,
fuel injectors etc.)
✔✔D
MEM and engine ECU connectors inspection
and lubrication
✔➀ D
MPEM mounting brackets/fasteners ✔ D
Digitally Encoded Security System ✔✔D
Monitoring beeper ✔✔D
Battery condition and fasteners ✔✔D
STEERING
SYSTEM
Inspection and cable adjustment ✔✔D
smo2002-003b.fm Page 67 Thursday, December 6, 2001 2:16 PM