EasyManua.ls Logo

SeaDoo 2002 GTX 4-TEC - Maintenance - Fuses and Pick-Ups; Fuse Inspection and Replacement

SeaDoo 2002 GTX 4-TEC
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
NOTE: Some items are included in the PRE-OPERATION CHECKS and not nec-
essarily repeated in this chart.
D: Dealer
O: Operator
In salt water use.
These items have to be initially checked after 25 hours. Thereafter, servicing
to be made as specified in this chart.
Daily flushing in salt water or foul water use.
Every 200 hours or 2 years.
Emission-related component.
Replace after the vehicle completed 100 hours of use or 2 years.
Replace after the vehicle completed 100 hours of use, not every year.
DESCRIPTION
FREQUENCY
FIRST 10
HOURS
EVERY 25
HOURS OR
3 MONTHS
EVERY 50
HOURS OR
6 MONTHS
EVERY 100
HOURS
OR 1 YEAR
TO BE
PERFORMED
BY
O.P.A.S.
SYSTEM
Check O.P.A.S. system operation and
condition including filter
✔✔D
PROPULSION
SYSTEM
Drive shaft protection boot inspection and
lubrication
✔➁ D
Shifter system/cable adjustment ✔✔D
Drive shaft rubber bumper replacement ✔➆ D
Impeller shaft seal, sleeve and O-ring
replacement
D
Impeller condition and impeller/wear ring
clearance
✔➁ D
Water intake grate condition ✔➁ O
Ride plate inspection including coolant leak ✔✔D
Visual inspection of drive shaft/hull sealing
system
✔✔D
HULL AND
BODY
Bailer pick-ups, check for obstructions ✔✔O
Hull condition ✔✔O
smo2002-003b.fm Page 68 Thursday, December 6, 2001 1:54 PM

Table of Contents

Related product manuals