SeaDoo Rotax 1503 4-Tec 2005 - ENGINES (1503 4-TEC); LEAK TEST

Section 01 ENGINES (1503 4-TEC)
Subsection 01 (LEAK TEST)
LEAK TEST
SERVICE TOOLS
Description Part Number Page
Drive shaft adapter ...............................................................
529 035 892
............................................. 2
Drive shaft adapter ...............................................................
529 035 985 ............................................. 2
SERVICE PRODUCTS
Description Part Number Page
Molykote 111........................................................................
413 707 000
............................................. 4
PROCEDURES
PREPARATION
Theprocedurehastobedonewhenengineop-
erating temperature of approx. 70°C(158°F) is
reached.

WARNING
Prevent burning yourself due to handling on
the hot engine.
Remove:
– any parts to have access to engine
– safety lanyard

WARNING
Safety lanyard must be removed to prevent
engine to be cranked while fuel rail is re-
moved to prevent fuel to be sprayed out.
Fuel is flammable.
– jet pump (refer to JET PUMP in the appropriate
VEHICLE SHOP MANUAL)
– coolant tank cap

WARNING
To prevent burning yourself only remove the
coolant tank cap by wearing the appropriate
safety equipment.
– oil dipstick
1
R1503motr153A
1. Oil dipstick
– Unplug ignition coil and pull it out
– spark plug.
NOTE: Ignition coil may be used as an extractor.
SMR2005-032 1
www.SeaDooManuals.net