Section 01 ENGINES (1503 4-TEC)
Subsection 04 (LUBRICATION SYSTEM)
WARNING
Wear safety glasses and work in a well
ventilated area when working with strong
chemical products. Also wear suitable non-
absorbent gloves to protect your hands.
– Remove oil suction pump cover with oil separa-
tor housing and his cover.
NOTE: On the supercharged intercooled engine,
theoilsuctionpumpcoverandoilseparatorisa
one-piece design.
– Remove oil strainer no. 12.
1
R1503motr120A
TYPICAL — NATURALLY ASPIRATED AND
SUPERCHARGED ENGINES
1. Oil strainer
R1503motr370A
1
TYPICAL — SUPERCHARGED INTERCOOLED ENGINE
1. Oil strainer
Cleaning and Inspection
Clean oil strainer with a part cleaner then use an
air gun to dry it.
WARNING
Always wear eye protector. Chemicals can
cause a rash break out in and an injury to your
eyes.
Inspect rubber rings no. 13 and no. 14.
1
R1503motr121A
2
TYPICAL — NATURALLY ASPIRATED AND
SUPERCHARGED ENGINES
1. O-ring
2. Rubber ring gasket
1
2
R1503motr371A
TYPICAL — SUPERCHARGED INTERCOOLED ENGINE
1. Gasket
2. Rubber ring gasket
If rubber rings are brittle, cracked or hard, replace
them.
48 SMR2005-035
To Next Page
Loading...