Section 01 ENGINES (1503 4-TEC)
Subsection 02 (INTAKE MANIFOLD AND SUPERCHARGER)
smr2005-033-007_a
1. Intercooler
2. Profile Ring
3. Collar
Supercharger
Supercharged Engines
CAUTION: Be scrupulous when working on
supercharger parts. Supercharger rotation
reaches 40 000 RPM. Any modification, im-
proper repair/assembly or damage on the
parts, may result in damage of the supercharg-
er. Strictly follow the described procedures.
Take apart supercharger housing.
1
F00B28A
3
2
1
1 1
1. Retaining screws
2. Housing half (intake side)
3. Housing half (engine side)
F00B29A
PLASTIC HAMMER
NOTE: The cap nut on the supercharger shaft has
LH threads.
Loosen cap nut (turn clockwise) on supercharger
shaft turbine side while holding shaft with a retain-
ing key (P/N 529 035 949).
529035949
1
R1503motr228A
1. Cap nut
Remove washer, turbine,
O-ring and step collar
from supercharger sha
ft.
18 SMR2005-033
To Next Page
Loading...