EasyManua.ls Logo

SeaDoo Rotax 1503 4-Tec 2005 - Page 58

SeaDoo Rotax 1503 4-Tec 2005
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 01 ENGINES (1503 4-TEC)
Subsection 04 (LUBRICATION SYSTEM)
R1503motr372A
1
TYPICAL SUPERCHARGED ENGINES
1. Oil pressure regulator
NOTE: The oil pressure regulator system opens
when the oil pressure exceeds 400 kPa (58 PSI).
Removal
Remove:
engine oil (refer to OIL CHANGE in the appro-
priate VEHICLE SHOP MANUAL)
oil pressure regulator plug no. 15, compression
spring no. 16, valve piston no. 17 and valve
piston guide no. 18.
WARNING
Oil pressure regulator plug on oil pump hous-
ing is spring loaded.
smr2005-035-002_a
TYPICAL NATURALLY ASPIRATED ENGINE
1. Valvepistonguide
2. Valve piston
3. Compression spring
4. Oil pressure regulator plug
5. O-Ring
smr2005-035-003_a
TYPICAL SUPERCHARGED ENGINES
1. Valvepistonguide
2. Valve piston
3. Compression spring
4. Compression spring
5. Oil pressure regulator plug
6. O-Ring
Inspection
Inspect valve piston and valve piston guide for
scoring or other damages.
Check compression spring for free length.
50 SMR2005-035
www.SeaDooManuals.net

Table of Contents