Section 01 ENGINES (1503 4-TEC)
Subsection 05 (COOLING SYSTEM)
1
2
F18E14A
1. Retaining screws
2. Oil pump cover
– remove oil pump cover no. 12
– remove outer oil pump rotor no. 13
1
F18E15A
1. Outer oil pump rotor
– extract the coolant/oil pump shaft no. 9 from
outside PTO housing cover with a pusher
1
F18E16A
2
1. Pusher
2. Coolant/oil pump shaft
– remove rotary seal no. 14 with a screwdriver
F18E17A
CAUTION: Be careful not to damage the surface
of the rotary seal bore in magneto housing cov-
er.
– always replace also the oil seal no. 15 behind
the rotary seal.
1
F18E18A
1. Oil seal
66 smr2005-088
To Next Page
Loading...