Hard Drive Maintenance
If a drive on your Seagate Personal Cloud 2-Bay fails, follow the directions below to replace it with a new hard
drive. Contact Seagate customer support for hard drive replacement if your device is within the warranty
.period
Your content aer a failed hard drive
.The availability of your content following drive failure depends upon how the device is configured
Maximum protection: Your content is safe on the healthy drive. The content must be copied for data
.mirroring after the failed hard drive is replaced
Maximum capacity: Unfortunately, all content is lost following a drive failure. Additionally, the device must
.be configured after the failed hard is replaced
Precautions
Remove a hard drive
Install a hard drive
Create a new volume
Precauons
Except for replacing a hard drive, performing maintenance within the enclosure is not supported and can
.void your product's warranty
.During operation, the drives should remain in place for optimal airflow
Observe all conventional ESD precautions when handling the Personal Cloud 2-Bay’s parts. Avoid contact
.with backplane components and module connectors, etc
.Replace an existing or faulty hard drive with a hard drive of equal capacity
.When handling hard drives, make sure that they are placed (and stored) on a cushioned surface
Remove a hard drive
.Disconnect power from the device before removing a hard drive
.Push the button on the back of your Personal Cloud 2-Bay .1
Important info: Refer to the warranty before performing hardware repairs or maintenance not
.described in this manual
To Next Page
Loading...
