.Select the Seagate Wireless Plus drive or Seagate USB .7
.Click the Erase button .8
(. For Format type, select Windows NT File System (do not select the compressed option .9
.Enter a recognizable name, for example, Seagate Wireless Plus drive .10
.This is the name that appears on the Desktop when you connect the Seagate Wireless Plus to your Mac
The Seagate Wireless Plus should be ready to use withing a few minutes. You may need to eject the device
.by dragging it to the trash can and then disconnect and reconnect it to gain full read and write capability
.You can now setup the Seagate Wireless Plus for your use .11
The Seagate Wireless Plus shuts down by itself
Your Seagate Wireless Plus includes a power-save feature, which means that it enters a standby state after 5
minutes of inactivity. Your device automatically returns to active mode whenever someone attempts to access
.it
I know the Seagate Wireless Plus is broadcasting, but I can’t stream from it
Up to five wireless-enabled devices can stream from the Seagate Wireless Plus at one time.To see how many
devices are currently connected to the Seagate Wireless Plus, open the Seagate Media app on a connected
.device and tap Users
The Seagate Wireless Plus beeps when I plug it in to my computer
The battery is low. Connect your Seagate Wireless Plus to a power outlet using the included USB to DC adapter
.and charge the device
Remember: If you are using Time Machine, do not allow the program to use the Seagate Wireless
.Plus drive for backup
To Previous Page
Loading...
