Seagull Models LANCAIR LEGACY User Manual

“Graphics and specifications may change without notice”.
MS:160
ASSEMBLY MANUAL
Specifications:
Wing span ------------------------------70.9in (180cm).
Wing area -----------------613.8sq.in (39.6sq dm).
Weight ------------------------9.7-10.6lbs (4.4-4.8kg).
Length ------------------------------58.8in (149.3cm).
Engine ------------------ 0.75-0.91cu.in -----2-stroke.
1.00-1.25cu.in -----4-stroke.
Radio ------------------- 6 channels with 11 servos.
Electric conversion: optional

Seagull Models LANCAIR LEGACY Specifications

General

Brand	Seagull Models
Model	LANCAIR LEGACY
Category	Toy
Language	English

Summary

Introduction and Preparation

Warning

Warns about potential risks and user responsibility when operating the model.

Airframe Assembly

Installing the Horizontal Stabilizer

Procedure for installing the horizontal stabilizer onto the fuselage.

Installing Vertical Fin

Steps for attaching the vertical fin to the fuselage.

Systems and Components Installation

Engine Mount Installation

How to install the engine mounting hardware onto the firewall.

Mounting the Engine

Securing the engine to the firewall and engine mount.

Installing the Fuselage Servos

Installing Nose Retractable Landing Gear

Electric Power Conversion

Steps for installing an electric motor and related components.

Installing the Aileron - Flap Servos

Installing the Battery-Receiver

Final Checks and Flight Preparation

Balancing

Critical procedure for achieving correct center of gravity for safe flight.

Control Throws

Flight Preparation

Steps to check control surface operation and directions before flight.

Preflight Check

Final checks before flying, including battery, bolts, balance, and controls.