Mitchell B-25 -for 20cc engines-95”
Instruction Manual
.
8
Apply 1-2 drops of thin C/A to each
of the mounting tabs. Allow the C/A to
cure without using accelerator.
Remove the string from the wing at the
servo location and use the tape to attach
it to the servo extension lead. Pull the
lead through the wing and remove the
string.
Set the aileron hatch in place and use a
Phillips screw driver to install it with four
wood screws.
3x10mm
8.
11.
12.
13.
14.
9.
10.
C/A glue
To Next Page
Loading...
