Seagull Models Pilatus PC-6 Porter User Manual

Made in Vietnam.
“Graphics and specifications may change without notice”.
Kit features.
• Ready-made—minimal assembly & finishing required.
• Ready-covered covering.
• Photo-illustrated step-by-step Assembly Manual.
Specifications
Wing span-------------------------------------- 63 in-------------------------------------- 160cm.
Wing area-------------------------------------- 722.3 sq.in-------------------------46.6 sq.dm.
Approximate flying weight------------------6.2-7.1 lbs----------------------------2.8-3.2kg.
Length------------------------------------------ 53.7in----------------------------------- 136.3cm.
Recommended engine size-------------- .46-.55cu.in---------------------------- 2-stroke.
.72-.82cu.in-----------------------------4-stroke.
ELECTRIC CONVERSION : OPTIONAL.
Recommended R/C --------------------------------------------- 4 channels with 5 servos.
Flying skill level ---------------------------------------------------- Advanced/Intermediate.
ASSEMBLY MANUAL
MS: 107
Pilatus PC-6
Porter

Seagull Models Pilatus PC-6 Porter Specifications

General

Skill Level	Intermediate to Advanced
Engine	0.91 cu in (15 cc) 2-stroke or 1.20 cu in (20 cc) 4-stroke
Radio	4 channel
Power	Gasoline
Material	Balsa/Plywood

Summary

Specifications

Wing span

Specifications for the wing span in inches and centimeters.

Wing area

Specifications for the wing area in square inches and square decimeters.

Approximate flying weight

Specifies the approximate flying weight in pounds and kilograms.

Length

Provides the length specification in inches and centimeters.

Recommended engine size

Details recommended engine sizes for 2-stroke and 4-stroke engines.

Recommended R/C

Specifies the recommended R/C setup, including channels and servos.

Flying skill level

Indicates the recommended flying skill level for the aircraft.

Kit features

PARTS LISTING.

FUSELAGE ASSEMBLY

Lists components for fuselage assembly, starting with the fuselage itself.

WING ASSEMBLY

Details parts for wing assembly, including left and right wings and dihedral brace.

Tail section assembly

Lists parts for tail section assembly, such as stabilizer and rudder halves.

HARDWARE PACK

Refers to the included hardware pack for various components.

COWLING

Refers to the cowling part of the aircraft assembly.

Landing gear

Mentions the landing gear component for the aircraft.

HINGING THE AILERONS.

HINGING THE RUDDER.

HINGING THE ELEVATOR.

AILERON CONTROL HORN

ELEVATOR CONTROL HORN.

RUDDER CONTROL HORN.

ENGINE MOUNT INSTALLATION.

WHEEL AND WHEEL PANTS INSTALLATION.

INSTALLING THE AILERON SERVOS.

INSTALLING THE SWITCH.

INSTALLING THE FUSELAGE SERVO.

THROTTLE SERVO ARM INSTALLATION.

INSTALLING THE STOPPER ASSEMBLY.

FUEL TANK INSTALLATION.

MOUNTING THE ENGINE.

COWLING INSTALLATION.

Electric Conversion (Ep Power) (OPTION).

SPINNER INSTALLATION.

INSTALLING THE HORIZONTAL STABILIZER.

INSTALLING THE VERTICAL STABILIZER.

INSTALLATION THE PUSHROD.

ELEVATOR - RUDDER PUSHROD INSTALLATION.

MOUNTING THE TAIL WHEEL.

INSTALLING THE BATTERY.

INSTALLING THE RECEIVER.

ATTACHMENT WING-FUSELAGE.

BALANCING.

CONTROL THROWS.

FLIGHT PREPARATION.

PREFLIGHT CHECK.