Seagull Models PC-9 - Engine and Fuel System Installation; Engine Mount Installation

5
www.seagullmodels.com
2 sets.
M3x35mm.
Install the elevator control horn using the
same method as with the aileron control
horns.
ELEVATOR CONTROL HORN.
2 sets.
3mmx35mm.
AILERON CONTROL HORN.
Masking tape.
Wing
bottom.
Aileron control horn.
Aileron.
M3 LOCK
ALUMINUM WASHER.
ALUMINUM WASHER.
CONTROL HORN
M3 SCREW.
Epoxy.
Epoxy.
18mm.
14mm.
EPOXY.
Horizontal
Stabilizer.
Elevator.
ALUMINUM WASHER.
CONTROL HORN M3
M3 LOCK NUT.
Epoxy.
Horizontal
Stabilizer.
Elevator.
ALUMINUM WASHER.