Seakeeper 5 GYRO - Page 20

OPERATION
MANUAL
Product:
Document #:
Rev:
Page:
SEAKEEPER 5 GYRO
90246
4
8 of 13
Section 2: SYSTEM OPERATION
6) When the GYRO reaches its maximum operating speed where maximum stabilization is
available, the PROGRESS BAR will disappear and the GYRO is available for maximum
stabilization.
2.3 Stabilization
For stabilization at sea or at anchor after GYRO is ON and at speed:
1) Press the LOCK/UNLOCK button. The button will turn GREEN indicating that the Gyro is
precessing and stabilizing the roll motion. The stabilizatoin mode starts gradually; it takes 5-10
seconds to reach full effectiveness.