OPERATION
MANUAL
Section 2: SYSTEM OPERATION
2.0 Introduction
This section describes operation of the Seakeeper 5 Gyro system.
2.1 Display Screens: Overview
1) When 12 Vdc is applied to the Gyro the DISPLAY will power up and initialize. The SPLASH screen
will be displayed
2) After the DISPLAY has initialized the HOME screen will be displayed
3) The DISPLAY has a set of five buttons that are under the BUTTON ICONS that appear on the
display screen. The BUTTONS are the means for selecting the functions of the DISPLAY.
To Next Page
Loading...
