Sealey GSA53 - User Manual

INSTRUCTIONS FOR:
AIR SHEARS
MODEL NO: GSA53
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
 WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.
 WARNING!Disconnect from air supply before changing accessories or servicing.
 Maintain the tool in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be dangerous
and will invalidate the warranty.
 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all connections are secure.
 Wear approved safety eye/face shield, ear defenders and hand protection.
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
 Keep children and non essential persons away from the working area.
 DO NOT use the tool for a task it is not designed to perform.
 WARNING! DO NOT use tool if damaged or thought to be faulty. Contact a Sealey service agent.
 DO NOT use tool unless you have been instructed in its use by a qualified person.
 DO NOT carry the tool by the air hose, or yank the hose from the air supply.
 DO NOT operate tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.
 DO NOT carry tool with your hand on the power trigger in order to avoid unintentional starting.
 DO NOT direct air from the air hose at yourself or others.
 When not in use disconnect from air supply and store in a safe, dry, childproof location.
Third Generation air shears features contoured and insulated handle to protect operator from the effects of vibration and chill. Smooth
operating mechanism suitable for cutting straight lines in steel sheet up to 1.2mm thickness.
Model No: ......................GSA53
Maximum cutting capacity:..... 1.2mm(Steel)
Air consumption:.................... 4cfm
Operating pressure: .................90psi
Noise Power: ................. 105.91dBA
Noise Pressure: ................ 94.91dBA
Vibration: ......................2.71m/s²
Uncertainty: ....................0.46m/s²
GSA53 Issue: 4(SP) - 21/10/14
Original Language Version
© Jack Sealey Limited
Read instruction
manual
Wear eye
protection
Wear ear
protection
Wear hand
protection

Summary

Safety Instructions

Personal Protective Equipment (PPE)

Mandatory PPE includes eye, ear, and hand protection for safe operation.

General Operational Safety

Adhere to safety regulations, maintain tool condition, and ensure correct air pressure.

Product Introduction

Features and Application

Details third-generation air shears with contoured handle for vibration/chill protection, suitable for sheet metal cutting.

Product Specification

Technical Specifications

Lists model number, max cutting capacity, air consumption, operating pressure, noise, and vibration levels.

Preparation and Setup

Air Supply Setup and Requirements

Details air pressure, flow, hose requirements, and daily/weekly maintenance for optimal air supply.

Coupling Recommendations

Advises connecting a leader hose to the tool to prevent failure from quick-change couplings.

Operation Guidelines

Starting and Running the Tool

Depress the throttle lever to start; avoid prolonged free running to prevent damage.

Maintenance Procedures

Blade Replacement and Lubrication

Instructions for replacing blades, ensuring correct part usage, and daily lubrication if no oiler is present.

Troubleshooting Common Issues

Addresses loss of power or erratic action due to air supply issues or grit/gum deposits.

Storage and Cleaning

Disconnect, clean, and store the tool safely when not in use.

Environmental Protection and Disposal

Recycling and Disposal Guidelines

Recommends recycling unwanted materials and proper disposal of fluids and the product according to local regulations.

Hand Arm Vibration Risk

Vibration Exposure Information

Details measured vibration emission values and recommends task-specific evaluations.

Health Surveillance and PPE

Recommends health surveillance and appropriate clothing/gloves to manage vibration injury risk.

Sealey GSA53 Specifications

General

Brand	Sealey
Model	GSA53
Category	Power Tool
Language	English