Need help?Do you have a question about the Sealey SUPERMIG130 and is the answer not in the manual?
General| Welding Process | MIG/MAG |
|---|---|
| Input Voltage | 230V |
| Max Output Current | 130A |
| Welding Current | 30 - 130A |
| Wire Size Range | 0.6 - 0.8mm |
| No Load Voltage | 48V |
| Weight | 18kg |
Covers essential electrical safety precautions and compliance requirements for operating the welder.
Outlines crucial general safety practices for welder operation, including personal protection and work environment.
Details safe handling, storage, and use of gas cylinders and related safety measures.
Instructions for correctly connecting the gas cylinder to the welder for operation.
Guide on how to properly install the welding wire spool onto the machine.
Steps to guide the welding wire from the spool through the torch assembly.
Procedures for adjusting wire feed tension to ensure optimal welding performance.
Explains the basic MIG/MAG welding process and how the welder functions.
Key steps and checks required before commencing welding operations.
Information on appropriate gas types for welding and their specific applications.
Details the welder's thermal overload protection system and its operation.
Instructions for maintaining the wire feed unit, including cleaning rollers and guides.
Guidelines for maintaining the welding torch, including cable protection and liner cleaning.
Procedure for correctly turning the feed roller to match the wire size.
Information on maintaining the contact tip, including replacement when worn or spattered.
Instructions for cleaning and maintaining the gas cup to prevent spatter buildup.
Steps for replacing a worn or damaged wire liner in the torch assembly.
Guidance on identifying and replacing worn gears in the wire drive unit.
To Next Page
