NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for
any claim.
INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
01284 703534
Sole U.K. Distributor
Sealey Group
Bury St. Edmunds
Suffolk.
Web
8. DECLARATION OF CONFORMITY
7. TROUBLESHOOTING
Declaration of Conformity We, the sole importer into the UK, declare that the product listed below is in conformity with the following
standards and directives
The construction file for this product is held by the Manufacturer and may be inspected
on request by contacting Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Digital Flow Meter
Model: TP101
2002/96/EEC WEEE Directive
93/68/EEC Marking Directive
21st November 2008
Signed by Steve Buckle
TP101 Issue No: 1 - 21/11/08
Problem Possible Cause Remedy
No LCD display
Bad battery connection Check /Clean Battery terminals
Batteries expired Replace batteries
Incorrect measurements
Wrong K Factor Refer to Section 5 Calibration
Flow rate below meter limits Increase ow rate
Reduced or zero ow rate Turbine blocked Clean turbine
Meter not recording ow
Faulty PCB Contact your Sealey dealer
Faulty turbine Contact your Sealey dealer
To Previous Page
Loading...
