Sears 5205 User Manual

FULL 1 YEAR WARRANTY ON SEARS MUL TIMETER
For one year from the date of purchase, if this multi-
meter fails to work properly due to a defect In material
or workmanship, Sears will repair it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY Re-
TURNING THE MULTIMETER TO THE NEAREST
SEARS STORE, OR SERVICE CENTER IN THE
UNITED STATES.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state.
SEARS, ROEBUCK AND CO.
Dept. 698/731 A, SearsTower, Chicago, IL60684.
Printed in KOREA
1
I Sears I
OWNERS
MANUAL
34460.5205
VOM-MUL TIMETER
with BATTERY TESTER
50,000 ohms/volts de
42 RANGES
SEARS, ROEBUCK ANP CO., Chicago, IL 60684 U.S.A.

Sears 5205 Specifications

General

Brand	Sears
Model	5205
Category	Multimeter
Language	English

Summary

Warranty Information

Full 1 Year Warranty

Details the warranty coverage for defects in material or workmanship.

Product Overview and Setup

Description

Explains the multimeter's features, sensitivities, and intended use.

Specifications

Lists technical details including DC/AC voltage, current, and resistance ranges.

How to Install Batteries

Provides step-by-step instructions for correctly installing batteries.

Operation and Measurement Procedures

Controls and Jacks

Identifies and explains the function of all controls and connection jacks.

Preliminary Adjustments

Outlines initial setup for accurate readings, including zeroing and battery checks.

Operating Suggestions

Offers tips for optimal use, including range selection and handling.

DC Voltage Measurements

Details the procedure for accurate DC voltage measurements.

DC Current Measurements

Explains how to measure DC current by connecting in series.

AC Voltage Measurements

Outlines the process for measuring AC voltage across a circuit.

AC Current Measurements

Describes indirect AC current measurement using Ohm's Law.

Resistance (Ohms) Measurements

Guides on performing resistance measurements and using multipliers.

Battery Check

Explains how to test the condition of various battery types.

Decibel Ratio Measurements

Details how to measure AC voltage ratios in decibels.

Inductance Measurements

Provides instructions for measuring inductance using the multimeter.

High Capacitance Measurements

Guides on measuring high capacitance values using specific circuits.

Low Capacitance Measurements

Guides on measuring low capacitance values using specific circuits.

Technical Diagrams

Schematic Diagram

Displays the internal circuit diagram of the multimeter for technical reference.