To Next PageTo Next Page
Need help?Do you have a question about the Sears Craftsman 944.529821 and is the answer not in the manual?
General| Clearing Width | 24 inches |
|---|---|
| Engine Displacement | 208 cc |
| Number of Forward Speeds | 6 |
| Number of Reverse Speeds | 2 |
| Engine Type | 4-cycle OHV |
| Chute Control | Manual |
| Auger Material | Steel |
| Wheel Size | 13 inches |
| Product Type | Two Stage Snow Blower |
| Drive Type | Wheel Drive |
| Intake Height | 21 inches |
Steps for removing the snow thrower from the carton and basic setup procedures.
Instructions for attaching handlebars and installing traction/auger control rods.
Procedures for installing the discharge chute and its remote control deflector.
Guidance on checking and adjusting tire pressure for optimal snow throwing performance.
Identification and explanation of controls, symbols, and general safety rules.
How to operate throttle, choke, drive controls, discharge chute, clean-out tool, and drift cutters.
Step-by-step instructions for starting and stopping the engine using electric and recoil starters.
Guidance on using controls, cleaning chutes, moving the unit, and general snow throwing tips.
Overview of regular maintenance tasks, frequency, and general upkeep guidelines.
Essential checks before operation and lubrication points for snow thrower components.
Procedures for checking engine oil, changing oil, and fuel system care.
Inspection and replacement guidelines for belts and spark plugs for optimal performance.
Instructions for adjusting skid plates to set the scraper bar clearance from the ground.
Procedure for replacing auger and impeller shear bolts that have broken due to overload.
Steps to remove the belt cover and replace drive belts for the snow thrower.
Procedures for removing wheels and adjusting cable tension for proper operation.
Information on engine speed governor and carburetor, and when to seek professional service.
Common problems and solutions for engine starting, power loss, and rough idling.
Troubleshooting for vibration, recoil starter, traction, and snow discharge problems.
Guidelines for preparing the snow thrower for long-term storage to prevent damage.
Details on product warranty period, coverage, exclusions, and customer obligations.
Illustrated parts list for the auger housing and impeller assembly.
Illustrated parts list for the control panel and discharge chute components.
Illustrated parts list for the snow thrower's handle assemblies.
Illustrated parts list for the snow thrower's drive system components.
Illustrated parts list for chassis, engine, and pulley assemblies.
Illustrated parts list for the snow thrower's wheel assemblies.
Illustrated parts list for items in the bag and various decals for the snow thrower.
