FOLDING YOUR ELLIPTICAL TRAINER
Note: It is important to always follow the correct order of steps when folding your
elliptical trainer.
STEP 1: The first step is to position the elliptical pedal arms in the proper posi-
tion. The pedal arms can be positioned in two different positions for convenience.
The first position is to rotate the left pedal arm so that it is in the backmost posi-
tion (the left pedal arm wheel should be positioned at the rear of the elliptical
trainer). The second position would be to rotate the right pedal arm in the back-
most position.
STEP 2: Carefully raise both the pedal arm (in the backmost position) and guide
rail simultaneously.
STEP 3: Press and hold the lock latch button located underneath the guide rail
end cap. Align the lock latch with the lock latch receiver located underneath the
pedal arm. Insert the lock latch receiver into the lock latch. Release the lock latch
button once the lock latch is secure.
STEP 4: Repeat process for alternate side.
Note: It is important to always follow the correct order of steps when unfolding
your elliptical trainer.
STEP 1: Firmly grasp both the left pedal arm and guide rail. Press and release
the lock latch receiver from the lock latch. Carefully lower the pedal arm and guide
rail, standing to the side to avoid any accidental release of the alternate pedal arm
and guide rail.
STEP 2: Repeat process for alternate side.
UNFOLDING YOUR ELLIPTICAL TRAINER
23
0
8
123 301340
ROUTINE MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our ellipticals so lubrication is not needed.
The most important maintenance step is to simply wipe your perspiration off the
trainer after each use.
HOW DO I CLEAN MY ELLIPTICAL TRAINER?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your elliptical trainer and its operating environment will keep main-
tenance problems and service calls to a minimum. For this reason, it is recom-
mends that the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
• Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they
can cause damage to the elliptical.
EVERY WEEK
Clean underneath the elliptical, following these steps:
• Move the elliptical trainer to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated
underneath the elliptical.
• Return the elliptical trainer to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
To Next Page
Loading...
