Autopilot Pump
7
Mounting & Plumbing
• Install SeaStar helm pump(s) using installation instructions
provided with your helm pump.
• Install steering cylinder(s) into boat using the installation manual
instructions provided with your steering cylinder.
• Refer to page 12 for electrical connections.
STEP 1
Overview
Due to the different cylinders options available with SeaStar
Steering, be sure that you choose the correct installation diagram
noted in this book.
NOTICE
Electrical Connections
STEP 2
Filling and Purging
• Refer to page 13 for filling and purging of the steering system.
STEP 3
HELM
CYLINDER
STEP 4
System Check
• Refer to page 20 of this manual.
• Install Autopilot pump as per instructions on page 8.
• Install steering hoses as outlined on page 9 to page 11 of
this manual.
AUTOPILOT PUMP
To Next Page
Loading...
