Seastar Solutions Autopilot Pump - Step 1: Mounting and Plumbing Details; Install Helm Pump(s); Install Steering Cylinder(s); Autopilot Pump Mounting

4
SEASTAR Hydraulics
Figure 1.
The SeaStar Autopilot pump is designed for use in recreational marine
applications, in conjunction with SeaStar Hydraulic Steering Systems.
It is a fixed flow, reversible pump-set that uses a high efficiency gear
pump, producing very little vibration or noise. It is offered in 12
and 24 volt configurations, as well as two different pump outputs
(type 1 and type 2). It can be used as a standalone Autopilot pump
or can be mounted to a previously installed SeaStar Power Assist
unit avoiding the need to install additional hydraulic lines.
Optimal performance will be attained when used with SeaStar
helm pumps and other genuine SeaStar components, such as;
SeaStar Hoses and SeaStar Steering Cylinders.
SeaStar Autopilot Pump Compatibility
SeaStar extruded nylon tubing may ONLY be used for the
compensating line. DO NOT use SeaStar extruded nylon tubing
ANYWHERE else within the system.
WARNING
AUTOPILOT PUMP