Transport and practical equipment
●
Remove the rear shelf from the side sup-
ports
›››
Fig. 127 by pulling it upwards and
then take it out.
If necessary, the rear shelf can be stored un-
der the luggage compartment double floor
›››
page 141.
Fitting
●
Insert the cover horizontally so that the “re-
cess” fits onto the axis of the supports
›››
Fig. 127 and press down until it engages.
●
Hook the loops
›››
Fig. 126
B
to the rear lid.
WARNING
Animals, loose or unsecured or objects car-
ried on the rear shelf can cause serious in-
jury in case of sudden manoeuvring or
braking or in case of an accident.
●
Do not leave hard, sharp or heavy ob-
jects or in bags on the rear shelf.
●
Never transport animals on the rear shelf.
CAUTION
●
Before closing the rear lid, ensure that
the rear shelf is correctly fitted.
●
An overloaded luggage compartment
could mean that the rear shelf is not cor-
rectly seated and it may be bent or dam-
aged.
●
If the luggage compartment is overloa-
ded, remove the tray.
Note
Ensure that, when placing items of clothing
on the luggage compartment cover, rear
visibility is not reduced.
Store the rear shelf
Fig. 128
In the luggage compartment: covers
for storing the rear shelf.
Fig. 129
In the luggage compartment: fitting
the rear shelf.
Depending on the equipment, once the lug-
gage compartment shelf has been removed,
it can be stored under the boot floor.
●
Remove the left and right covers
›››
Fig. 128.
●
Place the rear shelf in the corresponding
housing
›››
Fig. 129.
●
Put the left and right covers in their original
position.
141
To Next Page
Loading...
