Seat Ateca 2020 - Main Beam Headlight Bulb; Turn Signal Bulb

Fuses and bulbs
Main beam headlight bulb and turn
signal bulb
Fig. 55
In the engine compartment: remove
the cover.
Fig. 56
In the engine compartment: main
beam headlight bulb
2
and turn signal bulb
3
.
Main beam headlight bulb
–
Raise the bonnet.
–
Move the loop
›››
Fig. 55
1
in the direction
of the arrow and remove the cover.
–
Slide connector
›››
Fig. 56
2
to the left or
right and pull.
–
Remove the bulb by disconnecting the con-
nector.
–
Installation involves all of the above steps in
reverse sequence.
Turn signal bulb
–
Raise the bonnet.
–
Move the loop
›››
Fig. 55
1
in the direction
of the arrow and remove the cover.
–
Turn the bulb holder
›››
Fig. 56
3
anti-
clockwise and pull.
–
Remove the bulb by pressing on the bulb
holder and turning it anticlockwise at the
same time.
–
Installation involves all of the above steps in
reverse sequence.
63