Seat Leon 2005 - Lights and Visibility

Lights and visibility 109
Safety First Handling instructions Tips and Maintenance Technical Data
Lights and visibility
Lights
Switching lights on and off 
Switching on the side lights
– Turn the light switch ⇒ fig. 74 to position
.
Switching on dipped headlights
– Turn the light switch to position
.
Switching off the lights
– Turn the light switch to position 0.
Switching on the fog lights*
– Turn the control from position
 or  to the first stop. The
lights control symbol
 will light up.
Switching on the rear fog lights (vehicles with front fog lights)
– Turn the control from the position
 or  to the second stop
⇒ . An indicator lights up in the instrument panel.
Switching on the rear fog lights (vehicles with no front fog lights)
– Turn the control from the position
 to the last stop. An indicator
lights up in the instrument panel.
WARNING
Never drive with just the side lights on. Risk of accident. The side lights are
not bright enough to illuminate the road ahead and to ensure that other
road users are able to see you. Always use your dipped headlights if it is
dark or if visibility is poor.
Note
• The dipped beam headlights will only work with the ignition on. The side
lights come on automatically when the ignition is turned off.
• If the lights are left on after the key has been taken out of the ignition lock,
a buzzer sounds when the driver door is opened. This is a reminder to switch
off the lights.
Fig. 74 Detail of the dash
panel: Switch for lights,
fog lights and rear fog
light
s1cg.2.book Seite 109 Montag, 25. April 2005 3:54 15