Transport and practical equipment
Removing
●
Detach the cord loops
›››
Fig. 121
B
from
their hooks
A
.
●
Remove the rear shelf from the side sup-
ports
›››
Fig. 122 by pulling it upwards and
then take it out.
If necessary, the rear shelf can be stored un-
der the luggage compartment double floor
›››
page 139.
Fitting
●
Insert the cover horizontally so that the “re-
cess” fits onto the axis of the supports
›››
Fig. 122 and press down until it engages.
●
Hook the loops
›››
Fig. 121
B
to the rear lid.
WARNING
Animals, loose or unsecured or objects car-
ried on the rear shelf can cause serious in-
jury in case of sudden manoeuvring or
braking or in case of an accident.
●
Do not leave hard, sharp or heavy ob-
jects or in bags on the rear shelf.
●
Never transport animals on the rear shelf.
CAUTION
●
Before closing the rear lid, ensure that
the rear shelf is correctly fitted.
●
An overloaded luggage compartment
could mean that the rear shelf is not cor-
rectly seated and it may be bent or dam-
aged.
●
If the luggage compartment is overloa-
ded, remove the tray.
Note
Ensure that, when placing items of clothing
on the luggage compartment cover, rear
visibility is not reduced.
Store the rear shelf
3
Valid for: Leon
Fig. 123
In the luggage compartment: covers
for storing the rear shelf.
Fig. 124
In the luggage compartment: fitting
the rear shelf.
Depending on the equipment, once the lug-
gage compartment shelf has been removed,
it can be stored under the boot floor.
●
Remove the left and right covers
›››
Fig. 123.
●
Place the rear shelf in the corresponding
housing
›››
Fig. 124.
●
Put the left and right covers in their original
position.
139
To Next Page
