Safety
Securing the child seat with the “ISOFIX/i-
Size” system
You must follow the child seat manufacturer's
instructions.
●
Open the cut-out section behind the
marked grooves to access the retaining rings
›››
Fig. 32.
●
Press the child seat onto the “ISOFIX” re-
taining rings until it is heard to engage se-
curely. If the child seat is equipped with Top
Tether anchor points, secure it to the corre-
spondent ring
›››
page 40. Follow the child
seat manufacturer’s instructions.
●
Pull on both sides of the child seat to ensure
that it is properly anchored.
Child seats with the “ISOFIX/i-Size” and Top
Tether attachment system can be purchased
from technical services.
WARNING
The securing rings are designed only for
use with “ISOFIX” and Top Tether system
child seats.
●
Never secure other child seats that do
not have the “ISOFIX” or Top Tether system,
or safety belts or any other objects to the
securing rings – as this can result in poten-
tially fatal injuries to the child.
●
Ensure that the child seat is correctly se-
cured to the “ISOFIX” and Top Tether secur-
ing rings.
Top Tether securing belts
Fig. 34
Rear seats: adjustment and assembly
according to the Top Tether belt.
Fig. 35
Front passenger seat: adjustment and
assembly according to the Top Tether belt.
Child seats with the Top Tether system come
with a strap for securing the seat to the vehi-
cle anchor point, located at the back of the
rear seat backrest and provide greater re-
straint.
The objective of this strap is to reduce for-
ward movements of the child seat in a crash,
to reduce the risk of injuries to the head from
hitting the inside of the vehicle.
40
To Next Page
Loading...
