14
Start-up
Operation
Start-up
Steps to follow
Fig. 7 Start-up
1
2
3
• Insert the key into the scooter’s ignition.
• Press and turn the key clockwise to “on”
position
1
.
• Press the left brake lever
2
and the MODE
button
3
at the same time until an audio
signal sounds and READY is shown on the
instrument cluster display. The indicator light
D at the bottom of the instrument cluster will
then come on.
Now you can move o my operating the
accelerator grip.
¬ WARNING
It will only be possible to start-up the
eScooter while it is stopped.
To Next Page
Loading...
