7
Congratulations!
In the
seca 374
electronic baby scale you
have acquired a highly accurate, yet sturdy
piece of equipment.
seca has been putting its experience at the
service of health for over 150 years, and as
market leader in many countries of the
world, is always setting new standards with
its innovative weighing and measuring de-
velopments.
The
seca 374
electronic baby scale is de-
signed for use in the professional field. It is
intended both to establish birth weight and
to check weight gain in the growth process.
Safety
• Follow the operating instructions.
• Do not drop the scale or subject it to vi-
olent shocks.
• Have repairs carried out only by author-
ised parties.
Setting up the scale
The scale is fully assembled on delivery.
Remove the packaging and place the scale
on a firm, level surface.
Balance the scale by rotating the screws on
the supports. The scale must stand secure-
ly on the floor on all supports.
Power supply
The scale can be powered by battery or
mains adapter (optional).
The LC display has low power consump-
tion. If operating with a battery, 4000
weighing operations may be performed.
Once battery power is no longer sufficient,
batt
appears in the display.
Battery and mains unit
If the message or
batt
appears in
the display, you need to replace the battery.
You will require 6 x AA 1.5V Mignon batter-
ies.
– Turn the rear of the unit towards you.
–Press the latch of the battery compart-
ment and remove the lid.
– Remove the holder containing the bat-
teries.
– Take out the used batteries and insert
the new batteries in the holder.
Make sure the battery poles are cor-
rectly aligned.
– Replace the holder with the batteries in
the battery compartment.
–Close the lid.
To Next Page
Loading...
