Optional accessories and spare parts • 111
17-10-07-653-100_01-2020B
12.6 Weighing technology data, non-calibrated models
13.OPTIONAL ACCESSORIES AND SPARE PARTS
14.COMPATIBLE SECA PRODUCTS
15.DISPOSAL
Do not dispose of the device with household waste. The device must be dis-
posed of properly as electronic waste. Comply with the national provisions
applicable in your country. For further information contact our service depart-
ment at:
Accuracy on initial calibration
• Weighing range 1: 0 kg to 25 kg
• Weighing range 1: 25 kg to 100 kg
• Weighing range 1: 100 kg to 150 kg
• Weighing range 2: 0 to 50 kg
• Weighing range 2: 50 to 200 kg
• Weighing range 2: 200 to 300 kg
± 25 g
± 50 g
± 75 g
± 50 g
± 100 g
± 150 g
Weighing technology data, calibrated
Weighing technology data, non-calibrated
Maximum capacity 360 kg
Minimum capacity 1 kg
Increments 50 g
Tare range Up to 360 kg
Accuracy:
• 0 to 50 kg
• 50 kg to 360 kg
± 50 g
± 0.10 % ± 50 g
Accessory/spare part Article number
Switch-mode power supply:
100-240 V~ / 50-60 Hz, 12 V= / 1.5 A / 18 W
68 32 10 272
Barcode scanner See recommendation at www.seca.com
Evaluation software
Scale Standing aid Measuring rod
Configuration
software
EMR System
a
651 7021 099
650 1321 009
––
seca connect 103 EMR System
a.Not available from seca. seca Service will be pleased to assist if you have any questions concerning the compatibility of your EMR
System.
seca
software
To Next Page
