Model 888 17
GB
Changing the batteries
When or bAtt appear in the display, you should change the batteries. You need
4 type AA 1.5 V batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Push the battery compartment closure
towards “Battery” and open the cover.
– Take out the holder and batteries.
– Remove the used batteries and insert
new batteries in the holder.
Check that the polarity is correct.
– Place the holder and batteries in the
battery compartment.
– Close the cover.
– Then turn the scale back up the right
way.
9. Technical data
Dimensions
width: 330 mm
height: 130 mm
depth: 380 mm
Weight approx. 6.5 kg
Temperature range +10 °C to +40 °C
Batteries 4 type AA 1.5 V batteries
Calibration as per Directive
90/384/EEC approved for medical use, Class IIII
Medical product as per Directive
93/42/EEC Class I
Colour black and white
Maximum load 160 kg
Minimum load 2 kg
Graduations 200 g
Accuracy at first calibration 0 to 10 kg: ± 100 g
10 kg to 40 kg: ± 200 g
40 kg to 160 kg: ± 300 g
To Next Page
Loading...
