Secomam UviLine Series User Manual (English)

Questions and Answers:

T
Tyler DelgadoAug 2, 2025
What to do if Secomam Measuring Instruments show incorrect measured values?
- R
  Randall AlvaradoAug 2, 2025
  If you are getting incorrect measured values from your Secomam Measuring Instruments, there could be several reasons. First, check if the cuvette is dirty and clean it. Second, ensure that the dilution is done correctly by making the dilution again. Third, verify that you've selected the appropriate method; if not, select another method. Also, it’s important to ensure that both the zero measurement and the blank value are accurate by performing the zero again and measuring the blank again.
V
villegascharlesAug 7, 2025
Why Secomam UviLine give not stable results?
- W
  Walter JacksonAug 7, 2025
  If you're experiencing unstable results with your Secomam Measuring Instruments, it could be due to a couple of reasons. First, make sure that the cover of the cuvette compartment is properly closed. Second, the halogen lamp may be nearing the end of its life, so consider changing the halogen lamp.
C
craigleblancAug 12, 2025
What to do if data transmission to USB memory device does not work on Secomam Measuring Instruments?
- J
  Jeremy LyonsAug 12, 2025
  If data transmission to a USB memory device is not working with your Secomam Measuring Instruments, there are a couple of things to check. First, try using a different USB memory device, as the current one might not be recognized. Second, the USB memory device might be formatted to an unsupported file system. If it's formatted to NTFS, format it to the FAT32 file system instead.
M
Michael SpearsAug 17, 2025
What to do if Secomam UviLine Measuring Instruments measurement range undercut or exceeded?
- N
  Nicole MooreAug 18, 2025
  If the measurement range is undercut or exceeded on your Secomam Measuring Instruments, it could be due to an unsuitable method. Select another method with a suitable measuring range. Also, consider diluting the sample.
T
torresrobertAug 22, 2025
Why connected printer does not print with Secomam Measuring Instruments?
- D
  Diana HardyAug 22, 2025
  If the connected printer does not print with your Secomam Measuring Instruments, the printer may not be suitable. Connect a printer that can interpret the printer control language PCL-3.
K
Katherine JeffersonAug 27, 2025
How to fix Secomam Measuring Instruments spectrophotometer that doesn’t switch on?
- C
  casey82Aug 27, 2025
  If your Secomam Measuring Instruments spectrophotometer doesn’t switch on, the power cable might not be connected properly. Connect the power cable correctly.

Secomam UviLine Series Specifications

General

Brand	Secomam
Model	UviLine Series
Category	Measuring Instruments
Language	English

Summary

WARRANTY

Warranty Terms and Exclusions

Details the 3-year warranty, exclusions, return procedures, software guarantee, and property rights.

INFORMATION

Product Overview and Specifications

Covers ISO 9001 compliance, storage, model differences, and contact information.

SAFETY AND HANDLING

Safety Information and Safe Operation

Explains safety signs, authorized use, requirements, and unauthorized use of the instrument.

Hazardous Substances and General Handling

Provides guidance on handling hazardous substances, general care, and environmental considerations.

Instrument Packing and Transport

Instructions on proper packing and transport to maintain warranty.

INSTRUMENT OVERVIEW

Front Panel and Rear Connections

Identifies front panel components and details rear panel ports like USB and Ethernet.

Keyboard and Display

Describes the keyboard layout, key functions, and display elements/symbols.

Cuvette Compartment

Explains the quick-lock system for installing the cuvette holder.

TECHNICAL SPECIFICATIONS

Measurement Characteristics

Lists key performance specifications like wavelength range, accuracy, and resolution.

Measurement Modes and Memory

Details available measurement modes (Concentration, Spectrum, Kinetics etc.) and memory capacity.

General Instrument Data and Languages

Covers dimensions, weight, power, EMC, safety standards, and available languages.

COMMISSIONING THE INSTRUMENT

Initial Setup Procedures

Steps for installing batteries, connecting power, setting language, date, and time.

Self-Test and Warm-up Period

Explains the self-test procedure and the required warm-up time before measurements.

OPERATING THE PHOTOMETER

Basic Operation and Navigation

Covers powering on/off, main menu navigation, and general principles.

Concentration Mode: Method Programming and Setup

Steps for creating, programming, and saving new concentration methods.

Concentration Mode: Method Execution and Calibration

Running concentration measurements, creating calibration curves, and handling results.

Concentration Mode: Method Editing and Deletion

Modifying and removing existing concentration methods.

Absorption/Transmission Mode Operations

Guides on performing absorbance/transmittance measurements and printing results.

Special/Multi-wavelengths Mode Operations

Steps for creating, selecting, and executing multi-wavelength methods.

Spectrum Mode Operations

Steps for setting up spectrum measurement parameters and performing analysis.

Kinetics Mode Operations

Steps for programming, executing, and analyzing kinetics measurements.

MEMORY AND DATA MANAGEMENT

Memory Overview and USB Usage

Explains memory functions, data flow, and instructions for USB memory devices.

Measurement Dataset Operations

Details on dataset elements, saving, displaying, filtering, and deleting.

Result Recording and Display

Manual and automatic recording of results, and how to display them.

Data Export, Import, and Printing

Saving/exporting files to USB, printing data, and importing files from USB.

USER MANAGEMENT

User Levels and Rights

Explains user groups (Admin, User, Guest) and their permissions.

User Management Activation/Deactivation

Procedures for enabling or disabling user management.

User Account Management

Creating, modifying, and deleting user accounts.

INSTRUMENT ADJUSTMENTS AND SETTINGS

Language, Date/Time, and Contrast

Adjusting interface language, date/time, and screen contrast.

Reset and Information Display

Options for resetting settings and viewing instrument information.

Timer and Software Update

Using the timer function and updating the instrument's software.

MAINTENANCE AND TROUBLESHOOTING

Lamp and Battery Replacement

Procedures for changing the lamp and buffer batteries.

Cleaning Procedures

Guidelines for cleaning the instrument housing and optical lenses.

Troubleshooting Common Issues

Solutions for problems like no power, unstable results, or connectivity errors.

ACCESSORIES AND CONSUMABLES

Cell Holders and Tube Holders

Descriptions of various cell and tube holders for different sample types.

Automated Accessories

Details on automatic cell changers, sippers, and Peltier effect accessories.

Micro-Cell Diaphragms and Cell Listings

Information on diaphragms for micro-cells and a list of compatible cells.

Related product manuals

Secomam UviLine 9600

195 pages

Secomam UviLine 9400C