Need help?Do you have a question about the Secomam Basic and is the answer not in the manual?
General| Spectral Bandwidth | 5 nm |
|---|---|
| Light Source | Tungsten Halogen Lamp |
| Detector | Silicon Photodiode |
| Type | Spectrophotometer |
| Display | LCD |
| Measurement Range | 0-3 A |
| Resolution | 0.01 A |
| Power Supply | 220V/50Hz or 110V/60Hz |
Covers voltage, power disconnection, lab rules, and protective measures during operation.
Details scenarios where the spectrophotometer is considered unsafe for use due to damage or malfunction.
Explains the function of cursor, program, and number keys for instrument control and data entry.
Details the usage of software control keys like VALID, ESC, CON, and DEL for managing operations.
Provides a step-by-step guide for calibrating the pump's aspiration rate.
Provides instructions for exporting data from the instrument to a PC.
Details how to configure and manage quality control procedures for analyses.
Explains different analysis modes like End-point, Kinetics, and Bichromatism.
Provides instructions and warnings for changing the instrument's lamp.
Details the procedure for replacing the instrument's rechargeable battery.
Guides on how to replace the peristaltic pump head.
To Next Page
