Secomam Basic - 7.4. PUMP SET-UP

BASIC
- 21 -
7.3. DATE AND CLOCK SET-UP
Use the corresponding function key to increment date and time. Then « VAL » to store, « ESC » to
return to previous display.
7.4. PUMP SET-UP
Access to pump functions and set-up: Flow, dead volume, aspiration volume.
For your convenience, these volumes are factory preadjusted.
(Note: upon changing pump and tubing, you have to readjust setting).
Press (F4) « PUMP SET-UP », you will obtain:
Press (F5) « NO » for manual cuvette by cuvette operation (recommended using on highly-
contaminant tests).
By answering (F2) « YES », you obtain three choices:
D+1
M+1
Y+1
T+1
M+1