BASIC
- 41 -
8.13.
MEASURE
Zero measurement will be asked at the beginning of each analysis.
Introduce vial to the nozzle upon instructed by display. Audio beeper indicates aspiration. It is also
possible to start the sucking up by pressing the correspondent key. Remove tube as soon as
aspiration stopped.
Proceed like previously to suck up blanks
Use the key of corresponding function or the automatic detection of the vial to launch the aspiration of
each sample.
If measurement includes a standard, after the measurement of the blank, the software requires
inserting the standard and displays the concentration value of the standard. It is also possible to
modify it by pressing on the corresponding function key to the « Modify » menu. The new value of the
standard will thus be required.
To Next Page
Loading...
