Secomam Basic - Language Set-Up

BASIC
- 20 -
N
NOTE: CONFIGURATION screen is active when you see an
elevator in the middle of the screen. Use upward and downward
cursor keys to activate and have access to the next display
screen.
7.2. LANGUAGE SET-UP
This would be the first configuration to check upon starting the instrument. Successively press
« CONF », « downward cursor key », (F1) « Language set-up » then (F3) « English ».
Access to the menu which
allows modifying
parameters
of original analysis.
Access to pump
set
-
up menu
PUMP
QUALITY CONTROL
Confirm (F1) or skipping (F4) the
quality control function. Display (F3)
values and dates of previous control.
PROGRAM