BASIC
- 51 -
9.2.
BATTERY REPLACING
The battery which is used is a rechargeable battery. It is used when the mains is off, to maintain data
on BASIC screen and to finish kinetical reaction.
WARNING: This battery is automatically recharged by the BASIC, so do not
replace it by a disposable battery.
FIRST OF ALL, DISCONNECT THE BASIC TRANSFORMER FROM THE MAINS.
- Unscrew the two screws labeled A
- Remove the battery compartment cover.
- Extract the battery out of the compartment.
- Disconnect it.
- Replace the battery by a new one if needed.
- Insert the battery in its compartment.
- Replace the battery compartment cover.
- Connect the transformer.
- Switch on the instrument.
- Wait 30 minutes
- Disconnect the transformer without switching the instrument off.
There is no back lit on the screen but it is possible to see data.
PROBLEM
It is not possible to read data on the screen.
FIRST INTERVENTION
- Verify the connection way of the battery.
To Next Page
Loading...
