Secomam Basic - Software Control Keys; 6.3. DISPLAY DESIGN

BASIC
- 17 -
BASIC’s software control keys:
6.3. DISPLAY DESIGN
When using a standard cuvette, this cuvette is shown on the screen:
When the peristaltic pump is used, the screen represents the tube with the sample:
Erase & correct data
Reach software configuration screen
Quit active screen
Validate an operation
Programmed
temperature
Calculating method
Concentration value,
measuring unit
Absorbance value
(blank value
deducted)
Test name
Name of sample measured
(standard, sample X ...)